English
Espanol

Safety Data Sheet – Dust Control

Download as a pdf

Revised 09/05/2017

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION

Product name:

Product code:

Armor Guard Dust Control

AGDC-101

Manufacturer or supplier’s details

Company:

Address:

Telephone:

Millard Industries, Inc.

Texas

855-842-7667 8558-4Armor

Medical Emergency Phone Number: If immediate emergency dial 911

Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300

Recommended use of the chemical and restrictions on use

Recommended use:

Restrictions on use:

Dust Control, Erosion Control, Soil Stabilization

For industrial use only.

SECTION 2. HAZARDS IDENTIFICATION

Emergency Overview

Appearance Liquid
Color White
Odor Sweet

GHS Classification:

GHS Label element:

Not a hazardous substance or mixture.

Not a hazardous substance or mixture.

Potential Health Effects

Carcinogenicity:

IARC No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
OSHA No ingredient of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA.
NTP No ingredient of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Mixture:

Hazardous ingredients:

Mixture

Contains no hazardous ingredients according to GHS

SECTION 4. FIRST AID MEASURES

General advice: Show this material safety data sheet to the doctor in attendance.
If inhaled: Move to fresh air. If symptoms persist, call a physician.
In case of skin contact: Wash off with soap and water.
In case of eye contact: Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or persists.
If swallowed: Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care provider with this MSDS.

SECTION 5. FIRE-FIGHTING MEASURES

Suitable extinguishing media: Not combustible.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Unsuitable extinguishing Media: None
Specific hazards during fire Fighting: Cool closed containers exposed to fire with water spray.
Specific extinguishing Methods: This product is an aqueous mixture that will not burn.
Further information: Dried product film will burn in a fire.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures: Refer to protective measures listed in sections 7 and 8.
Environmental precautions: No special environmental precautions required.
Prevent product from entering drains.
Methods and materials for containment and cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).

SECTION 7. HANDLING AND STORAGE

Advice on safe handling: No special precautions are needed in handling this material.
Conditions for safe storage: Keep container closed when not in use.
Keep in a dry, cool place.
Materials to avoid: Do not freeze.
No special restrictions on storage with other products.
Storage temperature: >= 40 °F / 4 °C

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Ingredients with workplace control parameters

Contains no substances with occupational exposure limit values.

Personal protective equipment

Respiratory protection: No personal respiratory protective equipment normally required. In case of insufficient ventilation, wear suitable respiratory equipment.
Hand Protection Material: Nitrile rubber
Remarks: For prolonged or repeated contact use protective gloves.
Eye protection: Safety glasses
Protective measures: No special protective equipment required.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Liquid
Color: White
Odor: Sweet
Odor Threshold: No data available
pH: 4.0 – 5.5
Melting point/freezing point: 32 °F
Boiling point/boiling range: 212 °F
Flash point: Not applicable
Evaporation rate: Not determined
Flammability (solid, gas): Not classified as a flammability hazard
Upper explosion limit: Upper flammability limit not determined
Lower explosion limit: Lower flammability limit not determined
Vapor pressure: Not determined
Relative vapor density: Not determined
Density: 8.600 – 9.100 lb/gal

Solubility(ies)

Water solubility: Dispersible
Partition coefficient: No data available
n- octanol/water Auto-ignition temperature: Not determined

Viscosity

Viscosity, dynamic: Not determined
Solid Content, % by weight: 33 – 40
VOC, % by weight: Not determined

SECTION 10. STABILITY AND REACTIVITY

Chemical stability:

Possibility of hazardous Reactions:

Hazardous decomposition Products:

The product is chemically stable.

Hazardous polymerization does not occur.

Stable under normal conditions.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity

Product:

Acute oral toxicity: Acute toxicity estimate : > 5,000 mg/kg
Method: Calculation method
Acute dermal toxicity: Acute toxicity estimate : > 5,000 mg/kg
Method: Calculation method
Skin corrosion/irritation: No data available
Serious eye damage/eye irritation: No data available
Respiratory or skin sensitization: No data available
Germ cell mutagenicity: No data available
Carcinogenicity: No data available
Reproductive toxicity: No data available
STOT-single exposure: No data available
STOT-repeated exposure: No data available
Aspiration toxicity: No data available

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity:

Persistence and degradability:

No data available

No data available

Bioaccumulative potential

Mobility in soil:

Other adverse effects:

No data available

No data available

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal methods

Waste from residues: To the best of our knowledge, this product does not meet the definition of hazardous waste under the U.S. EPA Hazardous Waste Regulations 40 CFR 261. Solidify and dispose of in an approved landfill. Consult state, local or provincial authorities for more restrictive requirements.
The hazard and precautionary statements displayed on the label also apply to any residues left in the container.

SECTION 14. TRANSPORT INFORMATION

Special precautions for user:

Remarks:

Not dangerous goods

Domestic Regulation

International Regulation

Transport in bulk according to Annex II of MARPOL 73/78 and IBC Code

Not applicable for product as supplied.

SECTION 15. REGLATORY INFORMATION

SARA 311/312 Hazards: No SARA Hazards
SARA 302: SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313: SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) report.

Clean Air Act

This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section 12 (40 CFR 61).

US State Regulations

California Prop 65 This product does not contain any chemicals known to the State of California to cause cancer, birth or any other reproductive defects.

The ingredients of this product are reported in the following inventories:

TSCA On TSCA Inventory
DSL Not in compliance with the inventory
REACH Not in compliance with the inventory
AICS Not in compliance with the inventory
NZIoC Not in compliance with the inventory
ENCS Not in compliance with the inventory
KECI Not in compliance with the inventory
PICCS Not in compliance with the inventory
IECSC On the inventory, or in compliance with the inventory
TWINV Not in compliance with the inventory

Inventory Legend TSCA (USA), DSL (Canada), REACH (Europe), AICS (Australia), NZLoC (New Zealand), ENCS (Japan), KECI (Korea), PICCS (Philippines), IECSC (China), TWINZ (Taiwan).

SECTION 16. OTHER INFORMATION

Prepared by: Global Regulatory Department – phone: 1-760-779-1814

email: sales@getarmorguard.com

Further information

NFPA:

HMIS III:

The information and recommendations set forth herein are believed to be accurate. Because some of the information is derived from information provided to the Millard Industries, Inc. from its suppliers, and because Millard Industries, Inc. has no control over the conditions of handling and use, Millard Industries, Inc. makes no warranty, expressed or implied, regarding the accuracy of the data or the results to be obtained from the use thereof. The information is supplied solely for your information and consideration, and Millard Industries, Inc. assumes no responsibility for use or reliance thereon. It is the responsibility of the user of Millard Industries, Inc. products to comply with all applicable federal, state and local laws and regulations.