Safety Data Sheet – Soil Stabilizer
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Product Name : Armor Guard Soil
Stabilizer Product Code : AGSS-101
Manufacturer or supplier’s details
Company : Millard Industries, Inc.
Address : Texas
Telephone : 855-842-7667 8558-4Armor
e-mail: sales@getarmorguard.com
Medical Emergency Phone Number: Immediate emergency dial 911
Transport Emergency Phone Number (CHEMTREC): 1-800-424-9300
| Recommended use: | Soil Stabilization, Sub-Base Stabilization, Erosion Control, Dust Control |
| Restrictions on use | For industrial use only. |
SECTION 2. HAZARDS IDENTIFICATION
Emergency Overview
Appearance liquid
Color white
Odor sweet
| GHS Classification | |
| Eye Irritation: | Category 2A |
| GHS Label element | |
| Hazard pictograms: |  |
| Signal Word: | Warning |
| Hazard Statements: | H319 Causes serious eye irritation. |
| Precautionary Statements: | |
| Prevention: | P264 Wash skin thoroughly after handling. P280 Wear eye protection/ face protection. |
| Response: | P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice/attention. |
Potential Health Effects
Carcinogenicity:
| IARC | No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. |
| OSHA | No ingredient of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. |
| NTP | No ingredient of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. |
SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance / Mixture:
Mixture
Hazardous ingredients
Chemical Name CAS-No. Concentration [%]
Polyethylene glycol octyl phenoxy ether 9002-93-1 1 – 5
Polyethylene glycol octyl phenyl ether 9036-19-5 1 – 5
SECTION 4. FIRST AID MEASURES
| General advice: | Show this material safety data sheet to the doctor in attendance. |
| If inhaled: | Move to fresh air. If symptoms persist, call a physician. |
| In case of skin contact: | Wash off with soap and water. |
| In case of eye contact: | Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or persists. |
| If swallowed: | Do not induce vomiting. Seek medical attention if symptoms develop. Provide medical care provider with this MSDS. |
SECTION 5. FIRE-FIGHTING MEASURES
| Suitable extinguishing media: | Not combustible. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. |
| Unsuitable extinguishing Media: | None |
| Specific hazards during firefighting: | Cool closed containers exposed to fire with water spray. |
| Specific extinguishing methods: | |
| Further information: | This product is an aqueous mixture that will not burn. Dried product film will burn in a fire. |
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures:
Refer to protective measures listed in sections 7 and 8.
Environmental precautions: No special environmental precautions required.
Prevent product from entering drains.
Methods and materials for containment and cleaning up:
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
SECTION 7. HANDLING AND STORAGE
| Advice on safe handling: | No special precautions are needed in handling this material. |
| Conditions for safe storage: | Keep container closed when not in use. Keep in a dry, cool place. |
| Materials to avoid: | Do not freeze. No special restrictions on storage with other products. |
| Storage temperature: | >= 40 °F |
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Ingredients with workplace control parameters
Contains no substances with occupational exposure limit values.
Personal protective equipment
| Respiratory protection: | No personal respiratory protective equipment normally required. In case of insufficient ventilation, wear suitable respiratory equipment. |
| Hand Protection Material: | Nitrile rubber |
| Remarks: | For prolonged or repeated contact use protective gloves. |
| Eye protection: | Safety glasses |
| Protective measures: | No special protective equipment required. |
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
| Appearance: | liquid |
| Color: | white |
| Odor: | sweet |
| Odor Threshold: | No data available |
| pH: | 4.0 – 6.0 |
| Melting point/freezing point: | 32 °F |
| Boiling point/boiling range: | 212 °F |
| Flash point: | Not applicable |
| Evaporation rate: | not determined |
| Flammability (solid, gas): | Not classified as a flammability hazard |
| Upper explosion limit: | upper flammability limit not determined |
| Lower explosion limit: | lower flammability limit not determined |
| Vapor pressure: | not determined |
| Relative vapor density: | not determined |
| Density: | 8.900 – 9.100 lb/gal |
Solubility(ies)
| Water solubility: | dispersible |
| Partition coefficient: | No data available |
| n- octanol/water Auto-ignition temperature: | not determined |
Viscosity
| Viscosity, dynamic: | 125 – 1,125 cP |
| Solid Content, % by weight: | 54 – 56 |
| VOC, % by weight: | 1.1 |
SECTION 10. STABILITY AND REACTIVITY
Chemical stability:
Possibility of hazardous Reactions:
Hazardous decomposition Products:
The product is chemically stable.
Hazardous polymerization does not occur.
Stable under normal conditions.
SECTION 11. TOXICOLOGICAL INFORMATION
Acute toxicity
Product:
| Acute oral toxicity: | Acute toxicity estimate : > 5,000 mg/kg Method: Calculation method |
| Acute dermal toxicity: | Acute toxicity estimate : > 5,000 mg/kg Method: Calculation method |
| Skin corrosion/irritation: | No data available |
| Serious eye damage/eye irritation: | No data available |
| Respiratory or skin sensitization: | No data available |
| Germ cell mutagenicity: | No data available |
| Carcinogenicity: | No data available |
| Reproductive toxicity: | No data available |
| STOT-single exposure: | No data available |
| STOT-repeated exposure: | No data available |
| Aspiration toxicity: | No data available |
SECTION 12. ECOLOGICAL INFORMATION
Ecotoxicity:
Persistence and degradability:
No data available
No data available
Bio accumulative potential
Mobility in soil:
Other adverse effects:
No data available
No data available
SECTION 13. DISPOSAL CONSIDERATIONS
Disposal methods
| Waste from residues: | To the best of our knowledge, this product does not meet the definition of hazardous waste under the U.S. EPA Hazardous Waste Regulations 40 CFR 261. Solidify and dispose of in an approved landfill. Consult state, local or provincial authorities for more restrictive requirements. The hazard and precautionary statements displayed on the label also apply to any residues left in the container. |
SECTION 14. TRANSPORT INFORMATION
Special precautions for user:
Remarks:
Not dangerous goods
Domestic Regulation
International Regulation
Transport in bulk according to Annex II of MARPOL 73/78 and IBC Code:
Not applicable for product as supplied.
SECTION 15. REGLATORY INFORMATION
| SARA 311/312 Hazards: | Acute Health Hazard |
| SARA 302: | No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. |
| SARA 313: | This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) report. |
Clean Air Act:
This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section 12 (40 CFR 61).
US State Regulations:
| California Prop 65 | This product does not contain any chemicals known to the State of California to cause cancer, birth or any other reproductive defects. |
The ingredients of this product are reported in the following inventories:
| TSCA | On TSCA Inventory |
| DSL | All components of this product are on the Canadian DSL. |
| REACH | Not in compliance with the inventory |
| AICS | On the inventory, or in compliance with the inventory |
| NZIoC | Not in compliance with the inventory |
| ENCS | Not in compliance with the inventory |
| KECI | Not in compliance with the inventory |
| PICCS | Not in compliance with the inventory |
| IECSC | On the inventory, or in compliance with the inventory |
| TWINV | Not in compliance with the inventory |
Inventory Legend TSCA (USA), DSL (Canada), REACH (Europe), AICS (Australia), NZLoC (New Zealand), ENCS (Japan), KECI (Korea), PICCS (Philippines), IECSC (China), TWINV (Taiwan).
SECTION 16. OTHER INFORMATION
Prepared by: Global Regulatory Department – phone: 1-760-393-8337
sales@getarmorguard.com
Further information
The information and recommendations set forth herein are believed to be accurate. Because some of the information is derived from information provided to Millard Industries, Inc. from its suppliers, and because Millard Industries, Inc. has no control over the conditions of handling and use, Millard Industries, Inc. makes no warranty, expressed or implied, regarding the accuracy of the data or the results to be obtained from the use thereof. The information is supplied solely for your information and consideration, in behalf of Millard Industries, Inc. and assumes no responsibility for use or reliance thereon. It is the responsibility of the user of Millard Industries, Inc. products to comply with all applicable federal, state and local laws and regulations.
Revision Date 09/05/2017
Further information
NFPA:
HMIS III:
